PCB Hand Control Testing How-To

PCB Hand Control Testing How-To

Eric PaulLiquid error (sections/article-template line 21): The format option '%-m/%e/%y' is not a supported format.

Here is a quick video to help you test to see if it's the PCB switches causing the problem, or if you have another electrical issue.

The PCB boards are generally quick to blame, probably because it's the part you see and touch. 

Starting with testing the boards helps in troubleshooting, a top down approach.  If the problem you are experiencing on your bike still persist if you jump the pins in the hand control, than it's NOT the switches causing the problems so you need to work downstream from there to isolate the issue.

 

Leave a comment